Jump to content
TurboMagic

JCL installation problems in D10.4.2

By TurboMagic, in Delphi Third-Party

Recommended Posts

TurboMagic    91

TurboMagic
Posted

Hello,

when trying to install JCL (V2.8 build 5677) into D10.4.2 I get this failure message soon after it starts compiling Win32 stuff:

"This installation of RAD Studio 10.4 doesn't support dual packages."

Here's the log:

================================================================================
JCL 2.8 Testing Build 5677
==========RAD Studio 10.4 32 bit================================================
Installed personalities :
32 bit Delphi
64 bit Delphi
64 bit Delphi for OSX
32 bit Delphi for Android
64 bit Delphi for Android
32 bit Delphi for iOS
64 bit Delphi for iOS
32 bit Delphi for iOSSimulator
64 bit Delphi for Linux
64 bit C++Builder
================================================================================
Multiple profile installation
Single profile installation
================================================================================
Saving conditional defines...
Loaded template for include file C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\include\jcl.template.inc
Saved include file C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\include\jcld27win32.inc
Building source\common library units for RAD Studio 10.4 32 bit...
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" bzip2 Jcl8087 JclAbstractContainers JclAlgorithms JclAnsiStrings JclArrayLists JclArraySets JclBase JclBinaryTrees JclCharsets JclCompilerUtils JclComplex JclCompression JclContainerIntf JclCounter JclDateTime JclDevToolsResources JclExprEval JclFileUtils JclHashMaps JclHashSets JclIDEUtils JclIniFiles JclLinkedLists JclLogic JclMath JclMIDI JclMime JclNotify JclPCRE JclPreProcessorAlgorithmsTemplates JclPreProcessorArrayListsTemplates JclPreProcessorArraySetsTemplates JclPreProcessorBinaryTreesTemplates JclPreProcessorContainer1DTemplates JclPreProcessorContainer2DTemplates JclPreProcessorContainerIntfTemplates JclPreProcessorContainerKnownMaps JclPreProcessorContainerKnownTypes JclPreProcessorContainerTemplates JclPreProcessorContainerTypes JclPreProcessorExcDlgTemplates JclPreProcessorHashMapsTemplates JclPreProcessorHashSetsTemplates JclPreProcessorLexer JclPreProcessorLinkedListsTemplates JclPreProcessorParser JclPreProcessorQueuesTemplates JclPreProcessorSortedMapsTemplates JclPreProcessorStacksTemplates JclPreProcessorTemplates JclPreProcessorTreesTemplates JclPreProcessorVectorsTemplates JclQueues JclResources JclRTTI JclSchedule JclSimpleXml JclSortedMaps JclStacks JclStatistics JclStreams JclStrHashMap JclStringConversions JclStringLists JclStrings JclSynch JclSysInfo JclSysUtils JclTrees JclUnicode JclUnitConv JclUnitVersioning JclUnitVersioningProviders JclUsesUtils JclValidation JclVectors JclWideStrings pcre zlibh --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -M -$X+ -$G+ -$H+ -$P+ -$U- -$T- -$V+ -$J+ -$Z1 -$L+ -$Y+ -$J+ -$C- -$D- -$I- -$O+ -$Q- -$R- -$W- -N0"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -ns"System;System.Win;WinAPI;Vcl;Vcl.Imaging" -I"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\include" -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl" -R"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
653020 Zeilen, 3.14 Sekunden, 53088 Byte-Code, 16900 Byte-Daten.
Building source\windows library units for RAD Studio 10.4 32 bit...
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" Hardlinks JclAppInst JclCIL JclCLR JclCOM JclConsole JclCppException JclDebug JclDebugSerialization JclDebugXMLDeserializer JclDebugXMLSerializer JclDotNet JclHelpUtils JclHookExcept JclLANMan JclLocales JclMapi JclMetadata JclMiscel JclMsBuild JclMsdosSys JclMultimedia JclNTFS JclPeImage JclRegistry JclSecurity JclShell JclStructStorage JclSvcCtrl JclTask JclTD32 JclTimeZones JclWin32 JclWin32Ex JclWinMIDI mscoree_TLB mscorlib_TLB MSHelpServices_TLB MSTask sevenzip Snmp --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -M -$X+ -$G+ -$H+ -$P+ -$U- -$T- -$V+ -$J+ -$Z1 -$L+ -$Y+ -$J+ -$C- -$D- -$I- -$O+ -$Q- -$R- -$W- -N0"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -ns"System;System.Win;WinAPI;Vcl;Vcl.Imaging" -I"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\include" -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl" -R"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
217273 Zeilen, 1.22 Sekunden, 3843 Byte-Code, 596 Byte-Daten.
Building source\vcl library units for RAD Studio 10.4 32 bit...
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" JclFont JclGraphics JclGraphUtils JclOpenDialogFavorites JclOpenDialogHooks JclPrint JclVclResources JclVersionControl JclVersionCtrlCVSImpl JclVersionCtrlGITImpl JclVersionCtrlSVNImpl --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -M -$X+ -$G+ -$H+ -$P+ -$U- -$T- -$V+ -$J+ -$Z1 -$L+ -$Y+ -$J+ -$C- -$D- -$I- -$O+ -$Q- -$R- -$W- -N0"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -ns"System;System.Win;WinAPI;Vcl;Vcl.Imaging" -I"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\include" -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl" -R"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
44869 Zeilen, 0.69 Sekunden, 7281 Byte-Code, 24 Byte-Daten.
Building source\common library debug units for RAD Studio 10.4 32 bit...
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" bzip2 Jcl8087 JclAbstractContainers JclAlgorithms JclAnsiStrings JclArrayLists JclArraySets JclBase JclBinaryTrees JclCharsets JclCompilerUtils JclComplex JclCompression JclContainerIntf JclCounter JclDateTime JclDevToolsResources JclExprEval JclFileUtils JclHashMaps JclHashSets JclIDEUtils JclIniFiles JclLinkedLists JclLogic JclMath JclMIDI JclMime JclNotify JclPCRE JclPreProcessorAlgorithmsTemplates JclPreProcessorArrayListsTemplates JclPreProcessorArraySetsTemplates JclPreProcessorBinaryTreesTemplates JclPreProcessorContainer1DTemplates JclPreProcessorContainer2DTemplates JclPreProcessorContainerIntfTemplates JclPreProcessorContainerKnownMaps JclPreProcessorContainerKnownTypes JclPreProcessorContainerTemplates JclPreProcessorContainerTypes JclPreProcessorExcDlgTemplates JclPreProcessorHashMapsTemplates JclPreProcessorHashSetsTemplates JclPreProcessorLexer JclPreProcessorLinkedListsTemplates JclPreProcessorParser JclPreProcessorQueuesTemplates JclPreProcessorSortedMapsTemplates JclPreProcessorStacksTemplates JclPreProcessorTemplates JclPreProcessorTreesTemplates JclPreProcessorVectorsTemplates JclQueues JclResources JclRTTI JclSchedule JclSimpleXml JclSortedMaps JclStacks JclStatistics JclStreams JclStrHashMap JclStringConversions JclStringLists JclStrings JclSynch JclSysInfo JclSysUtils JclTrees JclUnicode JclUnitConv JclUnitVersioning JclUnitVersioningProviders JclUsesUtils JclValidation JclVectors JclWideStrings pcre zlibh --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\debug" -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -M -$X+ -$G+ -$H+ -$P+ -$U- -$T- -$V+ -$J+ -$Z1 -$L+ -$Y+ -$J+ -$C+ -$D+ -$I+ -$O- -$Q+ -$R+ -$W+ -N0"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\debug" -ns"System;System.Win;WinAPI;Vcl;Vcl.Imaging" -I"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\include" -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl" -R"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
653020 Zeilen, 2.86 Sekunden, 53256 Byte-Code, 16900 Byte-Daten.
Building source\windows library debug units for RAD Studio 10.4 32 bit...
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" Hardlinks JclAppInst JclCIL JclCLR JclCOM JclConsole JclCppException JclDebug JclDebugSerialization JclDebugXMLDeserializer JclDebugXMLSerializer JclDotNet JclHelpUtils JclHookExcept JclLANMan JclLocales JclMapi JclMetadata JclMiscel JclMsBuild JclMsdosSys JclMultimedia JclNTFS JclPeImage JclRegistry JclSecurity JclShell JclStructStorage JclSvcCtrl JclTask JclTD32 JclTimeZones JclWin32 JclWin32Ex JclWinMIDI mscoree_TLB mscorlib_TLB MSHelpServices_TLB MSTask sevenzip Snmp --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\debug" -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -M -$X+ -$G+ -$H+ -$P+ -$U- -$T- -$V+ -$J+ -$Z1 -$L+ -$Y+ -$J+ -$C+ -$D+ -$I+ -$O- -$Q+ -$R+ -$W+ -N0"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\debug" -ns"System;System.Win;WinAPI;Vcl;Vcl.Imaging" -I"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\include" -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl" -R"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
217273 Zeilen, 1.06 Sekunden, 3988 Byte-Code, 596 Byte-Daten.
Building source\vcl library debug units for RAD Studio 10.4 32 bit...
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" JclFont JclGraphics JclGraphUtils JclOpenDialogFavorites JclOpenDialogHooks JclPrint JclVclResources JclVersionControl JclVersionCtrlCVSImpl JclVersionCtrlGITImpl JclVersionCtrlSVNImpl --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\debug" -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -M -$X+ -$G+ -$H+ -$P+ -$U- -$T- -$V+ -$J+ -$Z1 -$L+ -$Y+ -$J+ -$C+ -$D+ -$I+ -$O- -$Q+ -$R+ -$W+ -N0"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\debug" -ns"System;System.Win;WinAPI;Vcl;Vcl.Imaging" -I"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\include" -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl" -R"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
44869 Zeilen, 0.59 Sekunden, 7840 Byte-Code, 24 Byte-Daten.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\Jcl.dpk...
Cleaning package cache for Jcl270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\Jcl.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\Jcl.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
128 Zeilen, 0.55 Sekunden, 1816588 Byte-Code, 719208 Byte-Daten.
Compilation success
...done.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclContainers.dpk...
Cleaning package cache for JclContainers270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclContainers.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclContainers.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;Jcl;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
69 Zeilen, 0.42 Sekunden, 2166156 Byte-Code, 884 Byte-Daten.
Compilation success
...done.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclDeveloperTools.dpk...
Cleaning package cache for JclDeveloperTools270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclDeveloperTools.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclDeveloperTools.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;Jcl;JclContainers;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
86 Zeilen, 0.39 Sekunden, 513416 Byte-Code, 14696 Byte-Daten.
Compilation success
...done.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclVcl.dpk...
Cleaning package cache for JclVcl270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclVcl.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclVcl.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;vcl;vclimg;Jcl;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
67 Zeilen, 0.42 Sekunden, 142392 Byte-Code, 1692 Byte-Daten.
Compilation success
...done.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclBaseExpert.dpk...
Cleaning package cache for JclBaseExpert270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclBaseExpert.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclBaseExpert.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;vcl;vclx;designide;Jcl;JclDeveloperTools;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
43661 Zeilen, 0.77 Sekunden, 66832 Byte-Code, 588 Byte-Daten.
Compilation success
...done.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclDebugExpert.dpk...
Cleaning package cache for JclDebugExpert270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclDebugExpert.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclDebugExpert.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;vcl;designide;Jcl;JclBaseExpert;JclDeveloperTools;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
8093 Zeilen, 0.59 Sekunden, 40856 Byte-Code, 468 Byte-Daten.
Compilation success
...done.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclProjectAnalysisExpert.dpk...
Cleaning package cache for JclProjectAnalysisExpert270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclProjectAnalysisExpert.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclProjectAnalysisExpert.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;vcl;designide;Jcl;JclBaseExpert;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
6983 Zeilen, 0.58 Sekunden, 29532 Byte-Code, 328 Byte-Daten.
Compilation success
...done.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclFavoriteFoldersExpert.dpk...
Cleaning package cache for JclFavoriteFoldersExpert270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclFavoriteFoldersExpert.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclFavoriteFoldersExpert.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;vcl;designide;Jcl;JclVcl;JclBaseExpert;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
3048 Zeilen, 0.56 Sekunden, 10864 Byte-Code, 212 Byte-Daten.
Compilation success
...done.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclRepositoryExpert.dpk...
Cleaning package cache for JclRepositoryExpert270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclRepositoryExpert.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclRepositoryExpert.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;vcl;designide;Jcl;JclContainers;JclBaseExpert;JclDeveloperTools;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
33622 Zeilen, 1.08 Sekunden, 46136 Byte-Code, 480 Byte-Daten.
Compilation success
...done.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclSIMDViewExpert.dpk...
Cleaning package cache for JclSIMDViewExpert270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclSIMDViewExpert.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclSIMDViewExpert.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;vcl;designide;Jcl;JclBaseExpert;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\experts\debug\simdview\JclSIMDUtils.pas(868) Warnung: W1000 Symbol 'TOTAThreadContext' ist veraltet
C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\experts\debug\simdview\JclSIMDUtils.pas(868) Warnung: W1000 Symbol 'TOTAThreadContext' ist veraltet
17838 Zeilen, 0.75 Sekunden, 59624 Byte-Code, 892 Byte-Daten.
Compilation success
...done.
Building C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclStackTraceViewerExpert.dpk...
Cleaning package cache for JclStackTraceViewerExpert270.bpl
Cleaning ok
Compiling package C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclStackTraceViewerExpert.dpk
"C:\Program Files (x86)\Embarcadero\Studio\21.0\bin\dcc32.exe" "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\packages\d27\JclStackTraceViewerExpert.dpk" --no-config -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\lib\Win32\release" -NU"..\..\lib\d27\win32" -I"..\..\lib\d27\win32;..\..\source\include;" -R"..\..\lib\d27\win32;..\..\source\include;" -DBCB;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE;BCB;WIN32;CONDITIONALEXPRESSIONS;RELEASE -U"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\;C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp;..\..\lib\d27\win32;..\..\source\include;" -LU"rtl;vcl;designide;Jcl;JclBaseExpert;" -ns"System;System.Win;WinApi;Vcl;Vcl.Imaging;" -LN"C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32" -LE"C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl"
Embarcadero Delphi for Win32 compiler version 34.0
Copyright (c) 1983,2021 Embarcadero Technologies, Inc.
43814 Zeilen, 0.75 Sekunden, 68596 Byte-Code, 476 Byte-Daten.
Compilation success
...done.
Added "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\include" to library search path.
Added "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\common;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\windows;C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\source\vcl" to library browsing path.
Added "C:\Program Files (x86)\Embarcadero\Studio\21.0\Extras\Jcl\jcl\lib\d27\win32\debug" to Debug DCU Path.
Cleaning package cache for JclBaseExpert270.bpl
Cleaning ok
Registering package C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl\JclBaseExpert270.bpl
Registration ok
Cleaning package cache for JclDebugExpert270.bpl
Cleaning ok
Registering package C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl\JclDebugExpert270.bpl
Registration ok
Cleaning package cache for JclProjectAnalysisExpert270.bpl
Cleaning ok
Registering package C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl\JclProjectAnalysisExpert270.bpl
Registration ok
Cleaning package cache for JclFavoriteFoldersExpert270.bpl
Cleaning ok
Registering package C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl\JclFavoriteFoldersExpert270.bpl
Registration ok
Cleaning package cache for JclRepositoryExpert270.bpl
Cleaning ok
Registering package C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl\JclRepositoryExpert270.bpl
Registration ok
Cleaning package cache for JclSIMDViewExpert270.bpl
Cleaning ok
Registering package C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl\JclSIMDViewExpert270.bpl
Registration ok
Cleaning package cache for JclStackTraceViewerExpert270.bpl
Cleaning ok
Registering package C:\Users\Public\Documents\Embarcadero\Studio\21.0\Bpl\JclStackTraceViewerExpert270.bpl
Registration ok


My user has no admin permissions but the Extras folder the JCL is under has write permission.

What's wrong?

Best regards
TurboMagic

Share this post

Link to post

Davide Angeli    41

Davide Angeli
Posted

Same problem here... I just download latest JCL from github to upgrade it.

 

Win32 goes fine but when the installer starts to compile win64 I got this:

 

image.thumb.png.78153a6969091939ce9ab256609b03a5.png

 

Could it be related to latest hotfixes? 

 

Share this post

Link to post

Davide Angeli    41

Davide Angeli
Posted
On 5/22/2021 at 5:18 PM, TurboMagic said:

Thanks!
Will check this. Do you know which consequences unticking that checkbox has?

I think is something related to use with c++. For me is irrelevant because I'm using only Delphi Pascal Compiler.

Share this post

Link to post

Fr0sT.Brutal    897

Fr0sT.Brutal
Posted

I just can't realize what's the need in 3rd party installers when there's straightforward install process from IDE.

  • Like 1

Share this post

Link to post

Stefan Glienke    1901

Stefan Glienke
Posted
On 5/24/2021 at 9:36 AM, Fr0sT.Brutal said:

when there's straightforward install process from IDE.

What process is that?

Share this post

Link to post

Fr0sT.Brutal    897

Fr0sT.Brutal
Posted
1 hour ago, Stefan Glienke said:

What process is that?

File > Open ... - Select package - Build - Install.

Share this post

Link to post

Stefan Glienke    1901

Stefan Glienke
Posted
17 minutes ago, Fr0sT.Brutal said:

File > Open ... - Select package - Build - Install.

That implies that there is nothing more than some code to compile - fwiw this does not even add the dcu output directory to the library path (which is my biggest issue with that "process") let alone all the other stuff the jcl/jvcl installer might do (I am no jedi dev, so I don't know how much of that is actually necessary).

Share this post

Link to post

Fr0sT.Brutal    897

Fr0sT.Brutal
Posted
3 hours ago, Stefan Glienke said:

That implies that there is nothing more than some code to compile - fwiw this does not even add the dcu output directory to the library path (which is my biggest issue with that "process") let alone all the other stuff the jcl/jvcl installer might do (I am no jedi dev, so I don't know how much of that is actually necessary).

Well, I'm not a fan of components doing tons of things before they are able to install (frequently they even unconditionally install themselves to paths THEY like). Adding DCU's to libpath - yes, that's a drawback but not a big one.

Share this post

Link to post

jbg    239

jbg
Posted (edited)

You can use the IDE's "process" for the JCL and JVCL but then you have to

  1. Build 4 JCL runtime packages and add their source path, library path and resource path (*.obj) to the IDE's settings
  2. Repeat step 1. for Win64
  3. Build and install up to 10 JCL Designtime package (the IDE plugins/experts)
  4. Build 28 JVCL runtime package and add their source path, library path and resource path (*.obj) to the IDE's settings
  5. Repeat step 4. for Win64
  6. Build and install 28 designtime package
  7. Repeat all steps for each installed Delphi version and skip the Win64 step if a Delphi version doesn't support it.

 

And that is for one person. If you are in a team and have only one Delphi version installed then the multiplier is the size of your team.

 

UPDATE: And not to forget. You need to compile the packages in the correct order because they depend on each other.

Edited by jbg
  • Haha 1

Share this post

Link to post

Vincent Parrett    657

Vincent Parrett
Posted
On 5/24/2021 at 5:36 PM, Fr0sT.Brutal said:

I just can't realize what's the need in 3rd party installers when there's straightforward install process from IDE.

I'm really not a fan of installers like this either.. and especially not a fan of code that a bunch of different modes/ifdefs that change it's behaviour. I would imagine that would be a nightmare for support - having to first work out how it was installed (with the correct options) before trying to reproduce issues. 

 

Jcl/Jvcl has always been too complicated - there are some real gems in there but I tend to avoid them because if you use one unit it pulls in 50 more - delphi being delphi, not everything is optimised away. Granted it's been many years since I last looked at it.. but just looking at that installer is enough make me avoid it.    

  • Like 2

Share this post

Link to post

Vincent Parrett    657

Vincent Parrett
Posted
4 hours ago, jbg said:

You can use the IDE's "process" for the JCL and JVCL but then you have to

This is something I'm working to improve with my package manager project. I would just say I want to install Jcl and it would work that out and install the dependencies etc in the correct order.

Share this post

Link to post

dummzeuch    1387

dummzeuch
Posted
14 hours ago, Fr0sT.Brutal said:

Adding DCU's to libpath - yes, that's a drawback but not a big one.

I don't want the DCU directory of any 3rd party component/library in my IDE's library path. In my opinion it belongs into the individual project's search path, if that project uses the library. Actually, I prefer to have the source code in the projects path rather than the DCUs.

  • Like 1

Share this post

Link to post

Fr0sT.Brutal    897

Fr0sT.Brutal
Posted
13 hours ago, jbg said:

You can use the IDE's "process" for the JCL and JVCL but then you have to

  1. Build 4 JCL runtime packages and add their source path, library path and resource path (*.obj) to the IDE's settings
  2. Repeat step 1. for Win64
  3. Build and install up to 10 JCL Designtime package (the IDE plugins/experts)
  4. Build 28 JVCL runtime package and add their source path, library path and resource path (*.obj) to the IDE's settings
  5. Repeat step 4. for Win64
  6. Build and install 28 designtime package
  7. Repeat all steps for each installed Delphi version and skip the Win64 step if a Delphi version doesn't support it.

There's a feature called - wait for it - PROJECT GROUPS! that could solve almost all of these steps.

Share this post

Link to post

Fr0sT.Brutal    897

Fr0sT.Brutal
Posted
22 minutes ago, dummzeuch said:

I don't want the DCU directory of any 3rd party component/library in my IDE's library path. In my opinion it belongs into the individual project's search path, if that project uses the library. Actually, I prefer to have the source code in the projects path rather than the DCUs.

That's a matter of taste.

Pity IDE doesn't have "Absolute Base" config that all other platform configs inherit from. Having to add lib paths for every platform is very irritating

Share this post

Link to post

dummzeuch    1387

dummzeuch
Posted
7 hours ago, Fr0sT.Brutal said:

There's a feature called - wait for it - PROJECT GROUPS! that could solve almost all of these steps.

Actually no, it doesn't.

Share this post

Link to post

Pat Foley    50

Pat Foley
Posted

Mixing vcl components into a fmx project group definely causes trouble. 

  

// CodeGear C++Builder
// Copyright (c) 1995, 2021 by Embarcadero Technologies, Inc.
// All rights reserved

// (DO NOT EDIT: machine generated header) 'dclPat.dpk' rev: 34.00 (Windows)

#ifndef DclpatHPP
#define DclpatHPP

#pragma delphiheader begin
#pragma option push
#pragma option -w-      // All warnings off
#pragma option -Vx      // Zero-length empty class member 
#pragma pack(push,8)
#include <System.hpp>	// (rtl)
#include <SysInit.hpp>
#include <pfControllerB.hpp>
#include <pattimerEX.hpp>

...

#include <System.Messaging.hpp>	// (rtl)
#include <System.Actions.hpp>	// (rtl)
#include <Vcl.ActnList.hpp>	// (vcl)
#include <System.HelpIntfs.hpp>	// (rtl)
#include <System.SyncObjs.hpp>	// (rtl)
#include <Winapi.UxTheme.hpp>	// (rtl)
#include <Vcl.GraphUtil.hpp>	// (vcl)
#include <Vcl.StdCtrls.hpp>	// (vcl)
#include <Winapi.ShellAPI.hpp>	// (rtl)
#include <Vcl.Printers.hpp>	// (vcl)
#include <Vcl.Clipbrd.hpp>	// (vcl)
#include <Vcl.ComCtrls.hpp>	// (vcl)
#include <Vcl.Dialogs.hpp>	// (vcl)
#include <Vcl.ExtCtrls.hpp>	// (vcl)
#include <Vcl.Themes.hpp>	// (vcl)
#include <System.AnsiStrings.hpp>	// (rtl)
#include <System.Win.ComObj.hpp>	// (rtl)
#include <Winapi.FlatSB.hpp>	// (rtl)
#include <Vcl.Forms.hpp>	// (vcl)
#include <Vcl.Menus.hpp>	// (vcl)
#include <Winapi.MsCTF.hpp>	// (rtl)
#include <Vcl.Controls.hpp>	// (vcl)
#include <Vcl.Buttons.hpp>	// (vcl)
#include <VCLTee.TeeHtml.hpp>
#include <VCLTee.TeeConst.hpp>
#include <VCLTee.TeCanvas.hpp>
#include <VCLTee.TeeFilters.hpp>
#include <VCLTee.TeeProcs.hpp>
#include <VCLTee.TeEngine.hpp>
#include <VCLTee.Chart.hpp>
#include <VCLTee.TeeSpline.hpp>
#include <Consts_Gen.hpp>
#include <pfTrackBar.hpp>
#include <pfArrowButton.hpp>
#include <sparkline.hpp>
#include <VCLTee.Series.hpp>
// SO_SFX: 270
// PRG_EXT: .bpl
// BPI_DIR: C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp
// OBJ_DIR: C:\Users\Public\Documents\Embarcadero\Studio\21.0\Dcp
// OBJ_EXT: .obj

//-- user supplied -----------------------------------------------------------

namespace Dclpat
{
//-- forward type declarations -----------------------------------------------
//-- type declarations -------------------------------------------------------
//-- var, const, procedure ---------------------------------------------------
}	/* namespace Dclpat */
#if !defined(DELPHIHEADER_NO_IMPLICIT_NAMESPACE_USE) && !defined(NO_USING_NAMESPACE_DCLPAT)
using namespace Dclpat;
#endif
#pragma pack(pop)
#pragma option pop

#pragma delphiheader end.
//-- end unit ----------------------------------------------------------------
#endif	// DclpatHPP

 Multi-device application chokes on the Tchart package in here. 

 

Short answer is don't mix vcl and fmx.    I only have DX pro how's it making C++:classic_ohmy:

 

 

Share this post

Link to post

Fr0sT.Brutal    897

Fr0sT.Brutal
Posted
17 hours ago, dummzeuch said:

Actually no, it doesn't.

Build everything in predefined order? Yes

Change build config in one click for all projects inside? Yes

IDK what else is needed

Share this post

Link to post

dummzeuch    1387

dummzeuch
Posted
1 hour ago, Fr0sT.Brutal said:

Build everything in predefined order? Yes

Change build config in one click for all projects inside? Yes

IDK what else is needed

Click on half a million design packages and select "install". That's the most annoying part because the design packages are intermingled with the run time packages so I'd need to click on every second one.

Share this post

Link to post

Lajos Juhász    238

Lajos Juhász
Posted
1 minute ago, dummzeuch said:

Click on half a million design packages and select "install". That's the most annoying part because the design packages are intermingled with the run time packages so I'd need to click on every second one.

There is a simple solution for this problem. Reorder the packages in the group, move the design time packages to the bottom.

Share this post

Link to post

dummzeuch    1387

dummzeuch
Posted
44 minutes ago, Lajos Juhász said:

There is a simple solution for this problem. Reorder the packages in the group, move the design time packages to the bottom.

Yes, I could do that, and the next time I update the package group from Github, I'd have to do that all over again.

 

My point is: There is no simple solution built into the IDE.

Share this post

Link to post

Lajos Juhász    238

Lajos Juhász
Posted
28 minutes ago, dummzeuch said:

Yes, I could do that, and the next time I update the package group from Github, I'd have to do that all over again.

Before next time just send a pull request. 

Share this post

Link to post

Fr0sT.Brutal    897

Fr0sT.Brutal
Posted
1 hour ago, dummzeuch said:

Click on half a million design packages and select "install"

Is it impossible to select multiple projects and do "Install all"? Good idea for feature request if so

Share this post

Link to post

TurboMagic    91

TurboMagic
Posted
On 5/21/2021 at 12:12 PM, Davide Angeli said:

In my case I've solved unchecking the "Dual Packages" option in the 64 bit page

 

 

That one worked. Thanks!

Share this post

Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing Delphi Third-Party
×