Borut

Before trying your advice, I will uninstall the current Gr32 version (D110 runtime and design time package) by: -removing the package (Component menu-Install packages....) -deleting the GR32_RD110.bpl and GR32_DD110.bpl in Bpl map ( .....\Documents\Embarcadero\Studio\22.0\Bpl) Is there anything else that I must check or delete to prepare a new clean install?

I ask you this because graphics32 version named graphics32-1-9-1-fixes-r2148 worked without problem on RAD Studio XE2. I would like to try that version on RAD 11, if it is possible. I use gr32 for artistic purposes and really means much to me.

I looked at the Environment variables and in System variables, and there is a path to GR32_RD110.bpl . I thank you so much for your patience and expertise. I will try to ask this question in the general forum. I just wanted to ask you if it is worth trying (if possible at all) to install some of the previous gr32 packages (lets say RX) into RadStudio11. Years ago, (if I remember correctly), I read somewhere, that it is possible with changing GR 32 Compiler.inc? Thanks again. Borut

I checked the library paths in c++ builder and they lead to a single graphics32 files (I added paths to following maps> Source, Packages, D110, DocProcessor and Maintenance. By using the command Trace Into ( I hope it corresponds to step into): a) if I used Trace Into after Run with debugging: it opened ustring.cpp in main window ...... ...... void __cdecl UnicodeString::ThrowIfOutOfRange(int idx) const { #if !defined(__clang__) || __cpp_exceptions if (idx < 1 || idx > Length()) // NOTE: UnicodeString is 1-based !! throw System::Sysutils::ERangeError(System_Sysconst_SRangeError); #else assert(idx < 1 || idx > Length()); #endif } UnicodeString::UnicodeString(const char* src): Data(0) STOPING in this line ........ b) if I used Trace Into without Run with debugging: it opened CPU window in the Main window And yes: I get the same results if using the full path to .bmp.

And again, If try something else with Image321 like: Image321->Top=random(500); it changes its position with every button click, but when I add in the next line: Image321->Bitmap->LoadFromFile("Miki.bmp") it reports access violation at address in module rtl280.bpl

I hope I am doing this wright... If I put a breakpoint to the mentioned line and then inspect (Run...Inspect), I get: for the Image321 a whole group of data with the top one: FBitmap ::02469B50 for the Image321->Bitmap a whole group of data with the top one: FOnHandleChange : NULL, NULL If I Evaluate Image321 I get : E2003 Undeclared identifier: 'Image321' Uf, I tried to inspect again and just got: Error inspecting Image321, E2003 Undeclared identifier: 'Image321'

Here is the copy of the call stack. I will try to inspect the values... :00404439 TForm1::Button1Click(this=:024221E0, Sender=:023ED2C0) :50cc8229 vcl280.@Vcl@Controls@TControl@Click$qqrv + 0x79 :50cccdc2 ; C:\Program Files (x86)\Embarcadero\Studio\22.0\bin\vcl280.bpl :50cf006d vcl280.@Vcl@Stdctrls@TButtonControl@WndProc$qqrr24Winapi@Messages@TMessage + 0x71 :50cccf1c ; C:\Program Files (x86)\Embarcadero\Studio\22.0\bin\vcl280.bpl :50cccdc2 ; C:\Program Files (x86)\Embarcadero\Studio\22.0\bin\vcl280.bpl :50e035a9 ; C:\Program Files (x86)\Embarcadero\Studio\22.0\bin\vcl280.bpl :50ccc33b vcl280.@Vcl@Controls@TWinControl@MainWndProc$qqrr24Winapi@Messages@TMessage + 0x2f :50174202 rtl280.@System@Classes@TDataModule@WriteHeight$qqrp22System@Classes@TWriter + 0x22 :777e339b user32.AddClipboardFormatListener + 0x4b :777da33a ; C:\Windows\SysWOW64\user32.dll :777d9709 ; C:\Windows\SysWOW64\user32.dll :777d7d4f user32.SendMessageW + 0x6f :71536608 ; C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.19041.1110_none_a8625c1886757984\COMCTL32.dll :71575f33 ; C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.19041.1110_none_a8625c1886757984\COMCTL32.dll :777e339b user32.AddClipboardFormatListener + 0x4b :777da33a ; C:\Windows\SysWOW64\user32.dll :777d9a07 ; C:\Windows\SysWOW64\user32.dll :777d7bab user32.CallWindowProcW + 0x1b :50ccceca vcl280.@Vcl@Controls@TWinControl@DefaultHandler$qqrpv + 0xe6 :50cccdc2 ; C:\Program Files (x86)\Embarcadero\Studio\22.0\bin\vcl280.bpl :50cf006d vcl280.@Vcl@Stdctrls@TButtonControl@WndProc$qqrr24Winapi@Messages@TMessage + 0x71 :50174202 rtl280.@System@Classes@TDataModule@WriteHeight$qqrp22System@Classes@TWriter + 0x22 :777e339b user32.AddClipboardFormatListener + 0x4b :777da33a ; C:\Windows\SysWOW64\user32.dll :777d809a ; C:\Windows\SysWOW64\user32.dll :777d7e60 user32.DispatchMessageW + 0x10

Thanks for the reply. I don't have problems at design time. If I load bitmap into Image321 from Object Inspector, the image is normally shown in Image321 before and also after compiling. It is only after compiling when I try to load bmp with button click: Image321->Bitmap->LoadFromFile("Miki.bmp"), that error occurs. The message I get in Events if run project with debugging is following: Project Project1.exe raised exception class $C0000005 with message 'access violation at 0xeefeeefe: read of address 0xeefeeefe'. The blue arrow in the window is pointing to the line : Image321->Bitmap->LoadFromFile("Miki.bmp") Borut

Hello, I try to use graphics32 package for Delphi11. I compiled GR 32 RD110 and GR 32 DD110 and installed GR 32 DD110. I can find components in Palette. But when I drop TImage32 on Form1 and after compiling try to open file with a button click ( I am using C++ builder) : void __fastcall TForm1::Button1Click(TObject *Sender) { Image321->Bitmap->LoadFromFile("Miki.bmp"); } I first get: Access violation in module rtl280.bpl ( If I uncheck link with dynamic RTL, this message disappears) but then: I get access violation at some address, which prevents loading the bitmap. If I try the same in Delphi11: procedure TForm1.Button1Click(Sender: TObject); begin Image321.Bitmap.LoadFromFile('Miki.bmp') end; end. it normally opens the bitmap. Can you give me any advice to overcome the trouble? Borut

Hello Anders, I try to use graphics32 package for Delphi11. I compiled GR 32 RD110 and GR 32 DD110 and installed GR 32 DD110. I can find components in Palette. But when I drop TImage32 on Form1 and after compiling try to open file with a button click ( I am using C++ builder) : void __fastcall TForm1::Button1Click(TObject *Sender) { Image321->Bitmap->LoadFromFile("Miki.bmp"); } I first get: Access violation in module rtl280.bpl ( If I uncheck link with dynamic RTL, this message dissapears) but then: I get access violation at some address, which prevents loading the bitmap. Can you give me an advice to overcome the trouble? Borut If I try the same in Delphi11: procedure TForm1.Button1Click(Sender: TObject); begin Image321.Bitmap.LoadFromFile('Miki.bmp') end; end. ž it normally opens the bitmap

Hello Anders, I try to use graphics32 package for Delphi11. I compiled GR 32 RD110 and GR 32 DD110 and installed GR 32 DD110. I can find components in Palette. But when I drop TImage32 on Form1 and after compiling try to open file with a button click ( I am using C++ builder) : void __fastcall TForm1::Button1Click(TObject *Sender) { Image321->Bitmap->LoadFromFile("Miki.bmp"); } I first get: Access violation in module rtl280.bpl ( If I uncheck link with dynamic RTL, this message dissapears) but then: I get access violation at some address, which prevents loading the bitmap. Can you give me an advice to overcome the trouble? Borut