wuppdi Welcome Page for Delphi 11 Alexandria?

[gkobler 38]

38 minutes ago, HeartWare said:

How do you make a sub-folder to an already existing folder in Favorite branch? Ie. I have a Favorite folder "Utils" under which I want to sub-divide my projects in "GUI" and "CLI", f.ex. When I click the "+" button, it always creates the new folder directly under Favorites. And when I try to Drag'n'Drop it into the correct folder, it just drags it to another position within the Favorites branch.

This is not supported. And was also not supported by the wuppdiWP.

39 minutes ago, HeartWare said:

Also, when I use Drag'n'Drop (after enabling it) from one favorite folder to another, it doesn't operate on the project I'm dragging, but always takes the top one from the source folder.

there are a bug in the TControlList (see RSP-38957). Just select what you would like to drop and then "enable drag'n drop"!

 

41 minutes ago, HeartWare said:

Also, when Drag'n'Dropping, it should MOVE the project instead of COPYing it (unless you hold down Ctrl when you drag - then it is a COPY operation, as per the standard Windows Drag'n'Drop).

This is also not supported by wuppdiWP, but i will look what i can do, but at the moment i'm very busy with other tasks

[Matthias 7]

@gkobler Small Feature request 😉

 

Please extend file type filter in OpenDialog "Add a Delphi Project" ideally similar to IDE (screenshot 1):
 

Minimum should be

*.dpr
*.dpk
*.*

 

Typing error (screenshot 2)

 

 

Edited October 20, 2022 by Matthias

[gkobler 38]

7 hours ago, Matthias said:

Added filter in v1.0.4.B15

[Matthias 7]

@gkobler

Initial setup issue

There is an error message when installing WP.gksoftPlugin280.bpl via "Install Packages" for the first time (screenshot 1).

 

It seems that HKEY_CURRENT_USER\SOFTWARE\Embarcadero\BDS\22.0\WelcomePage\gksoft is only created if you add a favorite.
gksoft should be created if it is not found in HKEY_CURRENT_USER\SOFTWARE\Embarcadero\BDS\22.0\WelcomePage.

[gkobler 38]

On 10/20/2022 at 6:27 PM, Matthias said:

Initial setup issue

There is an error message when installing WP.gksoftPlugin280.bpl via "Install Packages" for the first time (screenshot 1).

 

It seems that HKEY_CURRENT_USER\SOFTWARE\Embarcadero\BDS\22.0\WelcomePage\gksoft is only created if you add a favorite.
gksoft should be created if it is not found in HKEY_CURRENT_USER\SOFTWARE\Embarcadero\BDS\22.0\WelcomePage.

fixed in version 1.0.5.B17

 

Also fixed two RSP's see cange log at https://dwp.gksoft.ch

[Ian Branch 128]

Interesting happening.

D11.2.

I have 20 odd projects in a 'Favourites' folder.

I compressed one of the projects folder because I copied it to a new folder and was working there on a modified version.

Did what I had to do.

Closed and restarted Delphi and all projects from and including the compressed project, were missing??  All twelve of them.

I had to reload them all again.  😞

I can understand, but not necessarily like, the compressed folder project being missing, but the rest??

 

Ian

Edited February 7, 2023 by Ian Branch

[gkobler 38]

Hello @Ian Branch

 

I'm sorry to hear that, that the settings have been lost. But I can't explain the behavior through the plugin at the moment.

 

The data is stored in the registry under "Computer\HKEY_CURRENT_USER\Software\Embarcadero\BDS\22.0\WelcomePage\gksoft", every time you make an adjustment. Be it inserting a new entry or deleting. Also it should be no problem if you delete a project, in the list the entry is still contained, but that does not matter. If you want to open the no longer existing project you will get an error message.

 

By the way: When starting Delphi, favorites are read from the registry. Is it possible that Delphi has regenerated the registry tree under "BDS" with default values, and thus the values under "WelcomePage" have been deleted? Did you maybe start Delphi with the parameter -r?

 

I save from time to time my settings with the Migrationtool, at https://dwp.gksoft.ch it is explained how this works. So you have a backup of your settings just in case.

 

Gregor

[gkobler 38]

Follow the values in the registry

[Ian Branch 128]

I have now backed up the settings per the migration tool.

No, I don't start Delphi with the -r parameter.

[HeartWare 1]

Now that Delphi 11.3 has been released, do you have an estimate on when you'll be able to release a version of your plugin that supports 11.3?

[haentschman 92]

Quote

Now that Delphi 11.3 has been released, do you have an estimate on when you'll be able to release a version of your plugin that supports 11.3?

WP.gksoftPlugin280.bpl ...works, but the icons now imho 32x32 instead of 16x16. (Tree) I do not remember that they were so big.

Edited February 28, 2023 by haentschman

[gkobler 38]

1 hour ago, HeartWare said:

Now that Delphi 11.3 has been released, do you have an estimate on when you'll be able to release a version of your plugin that supports 11.3?

Hello i'm this and next week not in the office, but i will show what i can do to release a new version ASAP

 

22 minutes ago, haentschman said:

WP.gksoftPlugin280.bpl ...works, but the icons now imho 32x32 instead of 16x16. (Tree) I do not remember that they were so big.

Will investigate them

[gkobler 38]

I have now recompiled the WP Plugin with D11.3. It still looks exactly the same, there has been no change in appearance.

 

New Built 18 are ready to download

https://dwp.gksoft.ch

[Matthias 7]

B18 issue: Tree background in dark mode is white again (v11.3).

And we still have large icons.

Edited March 9, 2023 by Matthias

[gkobler 38]

42 minutes ago, Matthias said:

B18 issue: Tree background in dark mode is white again (v11.3).

Fixed.. still the same Built 18, but newer file ready to download

[gkobler 38]

43 minutes ago, Matthias said:

And we still have large icons.

I don't now how i can handle, because i have a VirtualImageList with different Iconsizes

 

And the VirtualImageList is connected to the TreeView Component. I think this is handled by the IDE himself of the HDPI Settings, or somthing like this

 

[Ian Branch 128]

The latest 'version' won't load into my D11.3. 😞

 

I have gone back to the previous version which loads fine.

 

Ian

[gkobler 38]

7 hours ago, Ian Branch said:

The latest 'version' won't load into my D11.3. 😞

Could you try the B19 please. I can not explain this, with me it runs without problems.

[Ian Branch 128]

Nope.  Same issue.  😞

[gkobler 38]

2 minutes ago, Ian Branch said:

Nope.  Same issue.  😞

Could it be that an older BPL file still exists somewhere else on the PC?

[Ian Branch 128]

Yes, but on a totally different drive/directory that isn't accessed.

[Ian Branch 128]

I deleted ALL of the WP.xxxx.bpl files, redownloaded it, added it to Delphi, same issue.

[gkobler 38]

New Built 21 released:

 

https://dwp.gksoft.ch

[Ian Branch 128]

Hi,

    Will you be doing one for D12??

 

Regards,

Ian

[Uwe Raabe 2059]

30 minutes ago, Ian Branch said:

Will you be doing one for D12??

Are you asking a theoretical question or in the wrong forum?